Lbc-4000 Front Panel Operations; Config:) Redund (Redundancy) Submenu - Comtech EF Data LBC-4000 Installation And Operation Manual
L-band up/down converter system
Hide thumbs
Also See for LBC-4000:
- Installation and operation manual (108 pages) ,
- Installation and operation manual (166 pages) ,
- Installation and operation manual (62 pages)
Table of Contents
Advertisement
B.2
LBC-4000 Front Panel Operations
Chapter 6. FRONT PANEL OPERATION
See Chapter 6. FRONT PANEL OPERATION for front panel figures and details.
See Chapter 6. FRONT PANEL OPERATION, Section 6.3.3 for the initial CONFIG menu.
B.2.1 (CONFIG:) REDUND (Redundancy) Submenu
Use the [][] arrow keys to select Mode, State, or F up. Press [ENT].
(CONFIG:) Redundancy Mode
Use the [][] arrow keys to select Manual or Auto. Press [ENT].
Note that, if you attempt to access this menu and the Redundancy State is Disabled, you will
see this message:
CONFIG: Redundancy State
Use the [][] arrow keys to select Disable or Enable. Press [ENT].
CONFIG: Redundancy FrcBkup
To force the redundant unit into standby mode, use the [][] arrow keys to select YES or NO.
Press [ENT].
Appendix B
Redundancy:
Mode
State
FrcBkup
Redundancy:
Control Mode = Manual
Not Available In
Current Mode
Redundancy Mode:
Control State = Enable
Config Manual Redundancy
Force Backup
LBC-4000 L-Band Up/Down Converter System
NO
B–3
Revision 6
MN-LBC-4000
Advertisement
Table of Contents
