Download And Extract Firmware Update Files - Comtech EF Data LBC-4000 Installation And Operation Manual

5.3

Download and Extract Firmware Update Files

Do these steps:
1. Go online to www.comtechefdata.com.
2. On the Main page – Under Support Information or the Support tab, select the
Software Downloads hyperlink.
3. On the Software Downloads page – Click Download Flash and Software Update
Files.
4. On the Flash Updates Index page – Select the (Select a Product Line) Converters
hyperlink.
5. On the Converters product page – Select the LBC-4000 or LBC-4000-ST product
hyperlink.
6. Select the appropriate firmware archive EXE or ZIP file download hyperlink.
7. Once you select the EXE or ZIP hyperlink, the File Download dialogue opens on your
browser and prompts an action. You may otherwise click [Cancel] to quit the file
download process. Note the following:
•
Firmware Update
For EXE files:
Click [Run] to open the self-extractor dialogue window. Use [Browse] to
o
select your destination folder. Click [Unzip] to extract the files. Your
results display as per this example – click[OK] to close. Your files are
now available for transfer to the LBC-4000.
LBC-4000 L-Band Up/Down Converter System
5–9
Revision 6
MN-LBC-4000