Utility:) Aid (Application Identification String) Submenu; Utility:) Lamptest Submenu; Utility:) Relay Submenu - Comtech EF Data LBC-4000 Installation And Operation Manual

6.3.6.4

(UTILITY:) AID (Application Identification String) Submenu

The Application Identification (AID) submenu allows you to create a customized message. The
AID may serve to identify the satellite, either transponder, beam, destination or other aspects of
the application that may be significant to operations. The default AID is "AID MESSAGE".
On the bottom line: At the "Edit AID Message?" prompt, use the [][] arrow keys to select No
or Yes. Press [ENT].
Typical for the top and bottom lines of the message, use the [][] arrow keys to select a
character, and then use the [][] arrow keys to change that character. A maximum of 24
characters are available on each line – 48 characters in all. Permissible characters are:
[Space]( )* + - , . / 0-9 and A-Z.
An example of an AID message is as follows:
Press [ENT] once you have composed your message. At the top level splash screen (which
identifies the product in use), you may use the [CLR] key to toggle between the splash screen
and the AID message.
6.3.6.5

(UTILITY:) LAMPTEST Submenu

On the bottom line: Use the [][] arrow keys to select No or press [CLR] to exit this submenu.
Otherwise, select Yes and press [ENT] to continue. The test begins with this message:
The front panel runs through a series of diagnostics: the LED array cycles, and then the VFD
generate a series of test patterns.
The LEDs and VFD return to their previous display state upon successful completion of the test.
Once the test has run, press [CLR] to return to the main menu.
6.3.6.6

(UTILITY:) RELAY Submenu

On the bottom line: Use the [][] arrow keys to set the Fault Relay Logic as Normal or Invert.
Press [ENT].
Front Panel Operation
Edit AID Message?
No Yes
LBC-4000 SERIES
48 CHARS MAX TST MESSAGE
Start Lamp Test?
No Yes
Lamp Test in Progress
Please Wait
FAULT RELAY LOGIC
Normal
LBC-4000 L-Band Up/Down Converter System
6–20
Revision 6
MN-LBC-4000