Use Windows Desktop To View Folder Contents; Use Windows Command-Line To View Folder Contents; Upload The Firmware Files And Update The Ut-4579 Unit; Important Considerations - Comtech EF Data UT-4579 Installation And Operation Manual

UT-4579 X-Band Up Converter
Firmware Update

5.3.1.1 Use Windows Desktop to View Folder Contents

From the Windows Desktop:
1. Double-left-click the Windows Explorer icon, and then double-left-click as
needed to locate, and then open, the "temp" folder (directory) created
earlier on the Windows Desktop.
2. Use the Browse window (Start > ...Run > Browse) to locate, and then
double-click to open, the "temp" folder.

5.3.1.2 Use Windows Command-line to View Folder Contents

From Command-line or Command Prompt:
1. Type "cd c:\temp" at the Windows Command-line prompt to change to
the temporary folder (directory) created earlier using Command-line.
2. Type "dir" to list the files extracted to the temporary folder from the
downloaded archive file.
5.4 Upload the Firmware Files and Update the
UT-4579 Unit
5.4.1

Important Considerations

Before you proceed with the firmware update, make sure that:
• You connect the UT-4579 'Ethernet' port to a Windows-based PC
Ethernet port with a CAT5e Ethernet cable.
• Your PC is running a terminal emulation program for operation of the UT-
4579 Telnet or serial interfaces.
• You have noted your UT-4579 Management IP Address.
• Your PC is running a compatible Web browser for operation of the UT-
4579 HTTP Interface.
• You download or otherwise have Comtech's latest firmware files and the
"CReflash" utility available on the User PC in an accessible temporary
folder.
5–11
MN/UT4579.IOM
Revision 1