Idu Module Removal Procedure - Comtech EF Data LBC-4000 Installation And Operation Manual

A.2

IDU Module Removal Procedure

Perform the following steps to remove the IDU Module:
Step
Task
1 Loosen the front panel
thumbscrews and drop
the front panel to
access the IDU
modules.
2 Loosen the captive
machine screws
holding the IDU
module in place.
3 Remove the Reference
Cable: Unlock and then
remove the connector
from its socket.
Appendix A
LBC-4000 L-Band Up/Down Converter System
A–2
Revision 6
MN-LBC-4000