UT-4579 X-Band Up Converter
Installation and Startup
4. Continue to slide the unit into the equipment rack to its final operating
position. Then, use four user-provided screws to secure the unit to the
equipment rack's right and left threaded front rails (through the front
panel slots).
3.3 Connect Prime Power Connection
The detachable power cord mates with the AC Prime power receptacle on the
rear of the converter chassis. A power cord for connection to 90 to 250V AC
power sources is provided with the converter.
3.4 Connect External Cables
Proceed to connect all external cables to the connectors outlined in the next
chapter (Chapter 4. FRONT AND REAR PANEL CONNECTIONS). Should difficulties
occur, call Comtech EF Data Customer Support for assistance.
3–8
MN/UT4579.IOM
Revision 1