2）How To Set Alarm - Seiko S833 Instructions Manual

(2) How to set Alarm
1) Daily alarm
① Press Button Ⓒ to select an alarm channel.
② Press and hold Button Ⓓ to activate the Alarm Setting function. The hour
digits start flashing.
③ With each press of Button Ⓑ, the hour and minute digits flash alternately.
Select the digits to be adjusted.
④ Press Button Ⓒ or Ⓔ to set the flashing digits. With each press of Button Ⓒ
3
or Ⓔ, flashing digits increase or decrease by one, respectively.
※The digits move quickly by pressing and holding Button Ⓒ or Ⓔ.
⑤ After all the adjustments are completed, press Button Ⓓ to deactivate the
Alarm Setting function and return to the Alarm display. If the watch is left
untouched with the digits flashing, the display automatically returns to the
Alarm in 2 to 3 minutes.
※By deactivating the Alarm Setting function, the alarm is automatically engaged (ON).
2) Schedule alarm
・Select an alarm channel in the application, and set year, month, date and time.
・By pressing and holding Button Ⓕ to perform Bluetooth communication, the
settings made in the application take effect in the watch.
・To check the schedule alarm time you have set, press Button Ⓒ in the Alarm
display to show the alarm channel for which you set the schedule alarm.
※The designated alarm time is shown in the middle row, and the year and month/date are
shown alternately in the bottom row.
※The schedule alarm time you set in the application cannot be changed in the watch. If you
change it by following the daily alarm setting procedure above, the daily alarm is set for
the alarm channel instead of schedule alarm, and the bottom row shows the current time.
138
Ⓑ Ⓒ
Ⓔ
Ⓑ
Ⓒ
Ⓑ
Ⓔ
Displayed
alternately