(4) How to set lighting duration
The duration during which the illuminating light is turned on can be adjusted. It is
factory-adjusted to 2 seconds.
・Press Button Ⓑ to show the Time/Calendar mode.
① Press and hold Button Ⓓ to activate the Time/Calendar Setting function.""DST"
appears in the top row, and flashing "on" or "off" is shown in the bottom row.
3
② Press Button Ⓑ repeatedly to show the lighting duration adjustment display
(LIGHT).
③ Press Button Ⓒ or Ⓔ to adjust the lighting duration.
2 seconds 3 seconds 4 seconds 5 seconds
※Note that frequent use of the illuminating light will cause the power reserve to decrease
faster.
④ After the lighting duration adjustment is completed, press Button Ⓓ to return to
the Time/Calendar display. If the watch is left untouched with the digit flashing,
the display automatically returns to the Time/Calendar in 2 to 3 minutes.
130
When 2 seconds is set for
lighting duration:
Ⓑ
Ⓒ
Ⓓ
Ⓔ