Seiko S833 Instructions Manual page 183

Problem
How to find magnetic
declination correction
value
Bluetooth communication
fails.
Pairing fails.
Automatic synchronization is
not performed. (1)
Information on declination is included in most maps. It can
also be found on the Internet.
Bluetooth communication and Pairing cannot be performed
properly in the following cases:
・Bluetooth communication function is turned off in the
smartphone.
・The application is not in operation or on standby.
・The watch does not have sufficient amount of power
reserve.
・In-flight mode is turned on.
・Paring procedure has not been completed properly.
(If the watch and/or the smartphone is paired with
another device, cancel the pairing in both the watch and
smartphone, and then, pair them again.)
・Communication may fail depending on the condition of the
environment.
・If pairing cannot be achieved, cancel pairing in both the
watch and the smartphone, and then perform re-pairing.
Automatic synchronization is not performed in the following
cases:
・Automatic synchronization is turned off in the application.
・Paring has not been achieved properly.
Solution
6
183