3）How To Use Rain Forecast Function; 4）How To Use Deta Deletion Function - Seiko S833 Instructions Manual

(3) How to use Rain Forecast function
While the Field Mode REC function is in operation, if the watch detects the
expected weather change from "Sunny" or "Cloudy" to "Rain" or "Snow" within one
hour from the current time according to the weather forecast data received from
the application, the watch signals the change with the graphics and beep sound.
※When the Rain Forecast function is activated, the display changes to the Weather
from any display except setting display, and the Rain Forecast display is shown with
beep sound (if set).
・Turning ON/OFF of the Rain Forecast function is to be set in the application. Showing of Rain
Forecast display and sounding of beeps can be set separately.
※The setting is transmitted to the watch at the time of manual Bluetooth communication performed by pressing
4 and holding Button Ⓕ, automatic synchronization performed at the times designated in the application, and
automatic data transmission while the Field Mode REC function is in operation.
・When the watch receives a "Rain" forecast, all the dots on the dial's edge and the information mark
" " keep flashing for one hour. The beep sound rings for 10 seconds. To stop the Rain Forecast
display and beep sound manually, press any of the buttons.
(4) How to use data deletion function
All the forecast data for the Weather mode, all the data for the Almanac Information mode, and all the
field logs yet to be transmitted to the application can be deleted at a time.
・While in the main Weather mode display or while
any forecast item is shown, press and hold Button
Ⓓ until the confirmation beep sounds. The main
Weather mode display indicating "no data" appears.
※The information mark " " flashes, the top row becomes
blank instead of showing the weather, and the bottom
row shows "- -" instead of temperature.
154
Ⓓ
Press & hold
Ⓓ
Confirmation
beep