Time Display Mode; How To Set The Time; How To Set Alarm On/Off - Seiko RC-4000 Instruction Manual

Time Display Mode
In the Time Display Mode,
the month, date, day, hours,
minutes, seconds, alarm on/
off and AM/PM symbol
marks are all shown.
When button A is pressed
the display reverts to the
Time Display Mode from
whatever its current mode.
* Hour and minutes are con-
stantly displayed, even in
the Data Display Mode.
1. How to set the time
You can set the time by the following procedures:
(1) Press button B while in the Time Display Mode to switch to the Time Setting Mode. At
first, seconds will start flashing.
(2) Press button C until the time element (e.g. seconds, minutes, hours, etc.) you wish to set
starts flashing. The time element changes in the following sequence.
1. Seconds —
- 6. Day of the Week
-— 2. Minutes -
5. Day -«-
3. Hour (AM/PM)
4. Month -
(3) Press button E to advance the time element. Continuous pressing of button E rapidly
advances the time element. When the time element is set as desired, press C to advance to
next time element.
(4) When setting is complete, press button A to revert to the Time Display Mode.
2. How to set alarm on/off
When buttons D and E are pressed simultaneously, the f^ f^
alarm on/off status alternates, as shown in the diagram.
To hear alarm beep sound, keep pressing buttons D and
E for 2 ~ 3 seconds.
"When the alarm on mark is not displayed in the Time
Display Mode, both the Schedule and Weekly Alarms
will not operate.
Display
Alarm
4 — <
ON
No symbol
OFF