Pairing - Seiko S833 Instructions Manual

To achieve Bluetooth communication, the devices to be connected should be
registered in each other in advance. This registration procedure is called "pairing."
Once pairing is successfully completed, the pairing information is registered in
both the watch and the smartphone, and they recognize each other automatically
thereafter.
Re-pairing is required in the following cases:
・When the pairing information is deleted after the watch is repaired or for
any other reason;
・When the watch is used with a new smartphone;
・When the pairing is cancelled in either the smartphone or the watch;
・When another watch is used with the smartphone. In that case, it is
necessary to cancel the pairing with the watch used so far and perform
pairing with the new one.
※Only one watch can be paired with a smar tphone. To share the application installed in a
smartphone with more than one watch, cancel the existing pairing and perform re-pairing each
time a different watch is used with the application.
※Make sure that both the watch and the smartphone are ready for Bluetooth communication.

Pairing

3
121