3）How To Record Log Point Information; 4）Caution On Deletion Of Field Logs - Seiko S833 Instructions Manual

(3) How to record log point information
While the 3D REC function is in operation, it is possible to designate a given location during
a trip as a "log point", and record such information as time, altitude, location and weather to
store them in the field log.
・Log point can be designated in any watch or field mode display. With each continuous
press of Button Ⓕ, information obtained at the present location is recorded as a log point
data.
Up to 100 log point data can be recorded during one use of the 3D REC function.
※While the 3D SHORT REC function, which records the altitude every 2 seconds, is in operation, Bluetooth
communication is not performed even if Button Ⓕ is kept pressed. However, the log point logs are recorded.
4
(4) Caution on deletion of field logs
When the weather forecast and other data is deleted in the Weather mode, the field logs
stored in the watch will also be deleted. Before deleting the Weather mode data, be sure to
transmit the field logs to the application. (See "How to use data deletion function" on P. 154.)
148
Ⓕ
Press & hold
Ⓕ
Log point information is
recorded with each
continuous press of Ⓕ