Band - Seiko S833 Instructions Manual

The band touches the skin directly and becomes dirty with sweat or dust.
Therefore, lack of care may accelerate deterioration of the band or cause skin irritation
or stain on the sleeve edge. The watch requires a lot of attention for long usage.
● Metallic band
・ Moisture, sweat or soil will cause rust even on a stainless steel band if they are left for a long time.
・ Lack of care may cause a yellowish or gold stain on the lower sleeve edge of shirts.
・ Wipe off moisture, sweat or soil with a soft cloth as soon as possible
・ T o clean the soil around the joint gaps of the band, wipe it out in water and then brush it
off with a soft toothbrush.
（Protect the watch body from water splashes by wrapping it up in plastic wrap etc.）
・ B ecause some titan bracelets use pins made of stainless steel, which has outstanding
strength, rust may form in the stainless steel parts.
・ I f rust advances, pins may poke out or drop out, and the watch case may fall off the
bracelet, or the clasp may not open.
・ I f a pin is poking out, personal injury may result. In such a case, refrain from using the
watch and request repair.
● Leather band
・ A leather band is susceptible to discoloration and deterioration from moisture, sweat and direct sunlight.
・ W ipe off moisture and sweat as soon as possible by gently blotting them up with a dry cloth.
・ Do not expose the watch to direct sunlight for a long time.

Band

5
175