Seiko S833 Instructions Manual page 128

③ To reset the seconds to "00," press Button Ⓑ to select the flashing second
digits, and then, press Button Ⓒ or Ⓔ in accordance with a time signal.
※If Button Ⓒ or Ⓔ is pressed while the second digits count any number between 30 and
59, one minute is added and the second digits are immediately reset to "00."
※The telephone time signal service (TEL 117) is useful for setting the seconds accurately.
④ Press Button Ⓑ to select the digits to be adjusted (flashing), and then, press
Button Ⓒ or Ⓔ to set them. With each press of Button Ⓒ or Ⓔ, the digits other
3
than seconds increase or decrease by one, respectively.
※The digits move quickly by pressing and holding Button Ⓒ or Ⓔ.
⑤ After the time/calendar setting procedure is completed, press Button Ⓓ to
return to the Time/Calendar display. If the watch is left untouched with the
digits flashing, the display automatically returns to the Time/Calendar in 2 to 3
minutes.
※The watch is equipped with a full automatic calendar. The year, month, date and day of the
week are pre-programmed from 2016 to 2065. During those years, the calendar adjusts
automatically for odd and even months including February of leap years.
※While the time/calendar setting is being made, all the digits of the display may light up.
This is not a malfunction. If this happens, press any of the buttons to return to the Time/
Calendar display, and then, resume the setting procedure from Step ① of (2) above.
128