① Press and hold Button Ⓓ to activate the altitude calibration, Drift Cancel and unit of measure
setting function. "ADJ" and current altitude are shown in the top and middle rows, respectively.
② Press Button Ⓒ or Ⓔ to increase or decrease the altitude digits, respectively to set the correct
altitude.
※When the unit of measure is set to "m": The digits can be set in 1 meter intervals. They change by
When the unit of measure is set to "ft": The digits can be set in 5 feet intervals. They change by 50
③ Pressing Button Ⓑ shows the Drift Cancel function setting display. "ON" or "OFF" starts flashing.
Press Button Ⓒ or Ⓔ to turn on or off the function.
④ Pressing Button Ⓑ shows the unit of measure setting display. "m" (meter) or "Ft" (feet) starts
flashing. Press Button Ⓒ or Ⓔ to set the unit of measure.
4
※When the unit of measure is changed, the altitude value is converted to the new unit of measure.
⑤ After all the settings are completed, press Button Ⓓ to deactivate the setting function. If the watch is left
untouched with the digits flashing, the display automatically returns to the Altimeter in 2 to 3 minutes.
Ⓓ
Altitude display
158
Ⓓ
Ⓑ
Press & hold
Ⓓ
Altitide calibration
10 meters by pressing and holding the respective buttons.
feet by pressing and holding the respective buttons.
Ⓒ
Ⓑ
Ⓑ
Ⓔ
Drift Cancel funcion
Ⓒ
Ⓑ
Ⓑ
Ⓔ
Unit of measure
Ⓑ
Ⓒ
Ⓔ