Seiko S833 Instructions Manual page 111

Watch Modes
Time/Calendar mode
Almanac Information
mode
Stopwatch mode
Alarm mode
Solar Monitor mode
Field Modes
Weather mode
Altimeter mode
Barometer/
Thermometer mode
Compass mode
Mode mark
shown on
top row
TIME Time/calendar setting (year: from 2016 to 2065), daylight saving time
(DST) setting, contrast adjustment, lighting duration setting, power
save setting, hourly time signal setting, alarm test, in-flight mode
setting, last sync time display, and cancelling of bluetooth pairing.
SUN Sunrise/sunset times, moonrise/moonset times, moon's
age, moon phase and tide are displayed based on the
location information provided by the smartphone.
Chrono Stopwatch measures up to 99 hours 59 minutes and 59
seconds 9 in 1/10-second increments.
ALARM Up to 6 channels can be set for daily or schedule alarm.
SOLAR Present level of solar generation and amount of power reserve are displayed. P.140
The watch downloads and displays hourly and daily weather
forecast information obtained by the application. The
information includes weather, amount of rainfall, chance of
etc.
rain, temperature, humidity, and direction and speed of wind.
ALTI Current altitude and climbing speed are measured and displayed.
Altitude log data is recorded while Field Mode REC function is
activated. Altimeter calibration and drift cancellation can also be made.
BARO Current atmospheric pressure and temperature are
measured and displayed. Atmospheric pressure is measured
every hour, and change in it is displayed graphically.
COMP Direction to which the 12 o'clock position of the watch
points is displayed. Magnetic declination correction function
is provided to indicate the true north.
Functions Refer to
1
P.126
P.133
P.135
P.137
P.149
P.155
P.161
P.165
111