Troubleshooting - Seiko S833 Instructions Manual

Problem
Display went blank.
Time indication has
differed from current time.
Alarm sounds.
How to measure
altitude
Accurate altitude
cannot be measured.
Weather forecast data is not
displayed.

Troubleshooting

The amount of power reserve has been depleted. Expose
the watch to light to charge the watch sufficiently.
Check the DST setting. When the DST is in effect
in your area, the time is advanced by one hour.
When the alarm mark " " is shown on the display,
any one of the 6 alarm channels is engaged.
Altitude is calculated based on atmospheric pressure.
Altitude measurement may vary due to change in
atmospheric pressure if you stay at the same place.
When measuring altitude, keep the temperature
of the watch as constant as possible. Altitude
measured at the same place may differ due to
change in atmospheric pressure.
Weather forecast data will not be displayed in the
following cases:
・Location information is not turned on in the smartphone.
・The watch has not yet been synchronized with the
application.
・24 hours or more has passed since the last
synchronization.
Solution Refer to:
P. 115
P. 127
P. 137
P. 160
P. 155
6
P. 149
181