Bluetooth Ⓡ Communication - Seiko S833 Instructions Manual

This watch supports wireless communication via Bluetooth, and the following data
is transmitted between the watch and the smartphone.
●From the smartphone to the watch
Watch setting
3
Field Mode REC function
Weather forecast
information
Rain forecast setting
Almanac information
Unit setting
●From the watch to the smartphone
Altitude data
Field Mode REC function
Log point
※Before transmitting data, make sure that both the watch and the smartphone are ready for Bluetooth communication.
※Bluetooth communication can be performed while the watch is in any mode except when a setting function is activated.
※By enabling automatic synchronization on the smartphone, data communication is made automatically at the times you have designated.
After turning on automatic synchronization and set the synchronization time, be sure to press and hold Button Ⓕ to perform Bluetooth
communication so that the settings take effect in the watch. Otherwise, automatic synchronization will not be performed even if it is
turned ON in the application.
124
Bluetooth Communication
Ⓡ
Time of current location, 12/24 hour time format, lighting duration, Power
Save setting, and alarm setting
Interval and maximum duration of recording field log data
Weather, amount of rainfall/chance of rain, temperature, speed/direction of
wind, and humidity of current location
Rain forecast display and beeps
Sunrise/sunset times, moonrise/moonset times, moon's age, moon phase and tide
Altitude, atmospheric pressure, and temperature
Altitude log data stored in the watch
Start/stop of Field Mode REC function
Altitude log data of a given point designated while Field Mode REC function is in use