Seiko S833 Instructions Manual page 145

3) To stop 3D REC function
① Press and hold Button Ⓔ in any of the field mode displays. The REC stop display
("STOP HOLd") appears.
※If "- - - -" is shown as the measurement is halted in the Altimeter, Barometer/Thermometer or Compass
mode, press Button Ⓔ to resume measurement, and then, press and hold Button Ⓔ.
② Press and hold Button Ⓔ further. "REC OFF" appears, and the 3D REC function is
stopped. The display returns to the one shown before the start of this procedure.
※After the 3D REC function is stopped, Bluetooth communication is performed. Even if Bluetooth
connection fails, the 3D REC function is stopped in the watch.
Ex.) To stop 3D REC function in Weather mode
Weather mode (３D REC ON）
Ⓔ
Press & hold
Ⓔ
Weather mode
3D REC function
stopped
Confirmation
beep
Confirmation
beep
Bluetooth connection
started
4
145