NEC ZA-SA3500G Function Manual page 88

[SNMP specifications]
Item Contents
SNMP version SNMPv1/SNMPv2c
Access restriction Can be set
Trap destination Can be set
setting
Monitoring 0:cold-start
possible trap
2:link-down
3:link-up
4:authentication-failure
Other configurable sysLocation
items
sysContact
MIB information Checking of MIB information
Clearing SNMP statistical
information
[Use case]
In a configuration using SA3500G, in addition to its own network, SA3500G MIB information can be acquired and trap
can be notified.
SNMP manager
[Trap notification conditions]
Cold-start is notified after restarting by means restart operation at Web setting or turning the power supply ON.

If the community name sent from the SNMP manager and the community name set in this product does not

match, authentication-failure trap is notified.
Pressing the "Apply" button in the "SNMP Setting" screen will send the trap of the link state (linkdown or linkup)

of WAN/LAN/PPPoE interface in order for the monitoring to restart.
88 Function Specification|
SA3500G
Remarks
Maximum of three SNMP managers can be set
Maximum of three SNMP managers can be set
Up to 60 minutes of delay can be set in the menu "Delay
time setting during SNMP trap transmission."
Interface link-down (WAN and PPPoE)
Interface linkup (LAN, WAN, PPPoE)
Setting of the physical location of the device
Contact information setting
Device MIB information can be retrieved through Web
Setting.
Clears SNMP statistical information.
SA3500G
SNMP manager
SNMP manager