NEC ZA-SA3500G Function Manual page 147

Hide thumbs Also See for ZA-SA3500G:
Table of Contents

Advertisement

Setting Item
Value
DHCP Client
• Checked: IP address of this product is
Function
• Unchecked: Set the IP address of this
IPv4 Address/
Input the IPv4 address and netmask for
Netmask
management of this product.
Gateway
Gateway information setting
Allocated
• Checked: The default gateway
Address from
Server
• Unchecked: Set the default gateway
Fixed Address
Input the default gateway address.
IPv4 DNS Server
DNS server address setting
Address
IPv4 DNS Server
• Automatic: DNS server address
Address Setting
Type
• Manual: Set the DNS server address to
IPv4 Primary
Input the primary DNSv4 server address
DNS
accessed by this product.
IPv4 Secondary
Input the secondary DNSv4 server
DNS
address accessed by this product.
Proxy Server
HTTP proxy server information setting
Proxy Server
• Checked: A proxy server is installed on
• Unchecked: A proxy server is not
Proxy Server
Set the address and port number of the
Address
HTTP proxy server. The setting format is
as follows:
• http://[IP address]:[port number]/
• http://[domain name]:[port number]/
• https://[IP address]:[port number]/
acquired in the DHCP client function.
product on this setting screen.
address of this product is acquired
from the DHCP client function.
address on this setting screen.
accessed by this product is acquired
by the DHCP client function.
be accessed by this product on this
setting screen.
the uplink interface of this product
installed on the uplink interface of this
product
Remarks
The IPv4 address is set as the
address that can connect to the
Internet. Input the netmask in
decimal notation.
When the DHCP client function is
not used, this item is grayed out.
When the DHCP client function is
not used, it will be "Manual"
setting.
When "Manual" setting is selected,
"IPv4 Primary DNS" is required.
This setup item is optional.
Set the address and port number of
HTTP proxy server.
Characters that can be inputted are
a combination of alphanumeric
characters and the following
symbols:
- _ . ! * / = + : @
|Setting/Setting Confirmation
Initial Value
Enabled
Not set
Enabled
Not set
Automatic
setting
Not Set
Not Set
Disabled
Not set
147

Advertisement

Table of Contents
loading

Table of Contents