Table of Contents
Advertisement
Setting Item
Value
IPv4 Static Routing
Entry Edit
Entry No.
Number of entries.
Destination IP
Specify the destination network
Address
of the routing entry.
Specification
• Interface: When specifying a
Method
routing destination with an
interface
• Gateway: When specifying a
routing destination with an
IPv4 address
Interface
• Select PPPoE or IPsec1.
Gateway
Set the IPv4 address of the
gateway.
Metric
Specify the metric value. Range
is from 1~255.
Remarks
50 entries can be set.
*Take note when IPsec1 is selected in the
interface
The IPv4 static routing setting is enabled
when setting a route base as a VPN
operation mode with IPsec setting.
Reduce the metric value for routing entries
to be prioritized.
|Setting/Setting Confirmation
Initial Value
Not set
Not set
Not set
Not set
Not set
Not set
197
Advertisement
Table of Contents
