Table of Contents
Advertisement
Config File
Factory Default
Maintenance
Restart
Maintenance Mode
Information
Device Status
Device Information
Routing Table
BGP Peer Status
VPN Status
VPN Statistics
MIB Information
Event Log
Diagnostics
ping
traceroute
Self Diagnosis
Packet dump
Saving and restoring settings
Execution of initialization of setting
Firmware setting
Product restart
Maintenance function setting
Product version and operating status display
Product information (device ID, serial number,
MAC address, and version information)
Operation mode
Wireless LAN information
IP address of product
DHCP leased address
Wi-Fi information
ARP table
Information on the routing table of this product
Information on neighboring routers with which
this product exchanges information
IPsec SA and IKE SA status
Deletion of IPsec SA and IKE SA
Certificate information and certificate export
Statistical information of IPsec traffic
SNMP MIB information
Operation log of this product
Checking of network connectivity
Verify the connectivity of target node by ping
Verify the connectivity of target node by
traceroute
Confirmation of setting information and server
reachability
Capture packets passing through this product
It is recommended to
save the setting values
when changes are made.
Be sure to check.
Setting to enable the
maintenance function
|Setting/Setting Confirmation
173
Advertisement
Table of Contents
