Table of Contents
Advertisement
Setting Item
Mode Setting
Automatic Registration
Configuration
Device List
MAC Address
IP Address
Information
Comment
Mail Address
Link
Mail
Statistics
Show
Clear
Access List
Show
292
Setting/Setting
Description
Specify whether the device management mode is MAC mode by MAC
address or IP mode by IP address. When the mode is changed, the
statistical information that was held in this product until then will be
cleared. Please be careful.
Check this item to automatically enable statistical information for each
terminal.
The following items can be displayed and set for each terminal.
Displays the MAC address of the detected terminal.
MAC address can be entered manually.
Displays the detected IP address.
Displays relevant information such as OS of the detected terminal.
Different information may be displayed depending on the application
used and other factors.
Input the name to identify the terminal. ", ', `, ＄, ￥, <, > cannot be
used
Input an e-mail address of the terminal user to receive e-mail
notifications.
Wired, wireless, and not connected are indicated by icons.
If target managed terminal is not detected from this product, not
connected is displayed.
Check to enable e-mail notification.
Check this if statistics information for each terminal needs to be
collected. A maximum of 50 terminals can be checked. Check the
terminal that was manually entered.
Click to see the statistical information of the selected terminal.
The corresponding line is a blank line and manual registration is
available. When setting is saved with a blank line, the terminal
information that is automatically detected after the screen update may
be displayed.
Click to view terminal information that cannot be displayed in the device
list.
Confirmation|
Initial
Value
MAC
mode
Enabled
Not Set
Not Set
Not Set
Disabled
Disabled
Advertisement
Table of Contents
