Table of Contents
Advertisement
10. When the above procedures are completed, it will move to the TOP screen.
If this is displayed in the screen, the following can be considered.
・Activation is incomplete (first time only)
・License check is incomplete after device startup.
11. If necessary, set the network of this product.
Refer to Section 5.6 for the details.
12. Set the security/scan function. (Refer to Section 5.8)
13. Set configuration management. (Refer to Section 5.9)
14. Save the settings.（Refer to Section 5.5）
15. Activate the product.（Refer to Section 5.2.3）
Activation is executed only at initial startup.
16. Confirm availability of new firmware with the online upgrade function. If there is new firmware, update the
firmware. (Refer to Section 5.6.14)17. Restore the IP address of the computer.
*Set it to its original settings
130
Setting/Setting
Confirmation|
Activation
Advertisement
Table of Contents
