Login - NEC ZA-SA3500G Function Manual

5.4. Login

This section describes the login procedure when accessing this product.
1. Connect a computer to the LAN port of this product.
2. For bridge mode, set the computer's IP address to 169.254.xxx.xxx/16 (*1), then access http://169.254.254.11/
on a web browser.
(*1) xxx is an arbitrary integer from 1-254. 169.254.254.11 is excluded.
*If the IP address is assigned to the PC, it may not be accessible at http://169.254.254.11/.
If that is the case set the route of PC. An example of Windows PC configuration is shown below.
１）Start the command prompt with administrator privileges.
２）Enter the following command and enter.
route add 169.254.0.0 mask 255.255.0.0 <IP address assigned to PC>
For router mode, access http://192.168.110.1/ (initial value) in a web browser. As in bridge mode, the computer's
IP address can also be set to 169.254.xxx.xxx/16 (*1), and http://169.254.254.11/ can be accessed through a
web browser.
The Web settings can be accessed with HTTPS. Use it if the access to the Web setting needs to be encrypted in the
environment. A security warning may appear on browser at HTTPS access, since there is no problem, continue
with the access.
3. As the user name/password login screen opens, enter the user name and password and click the "OK" button.
Setting Item Value
Username admin
Password (administrator password set
by customer) *2
*2 Set using the wizard during the initial startup. (Refer to Sections 5.2.1 and 5.2.2)
Remarks
Fixed value
Refer to Section 5.6.10 for changing the password.
|Setting/Setting Confirmation 139