NEC ZA-SA3500G Function Manual page 167

■When the Web setting is used (Local file specification)
[Setting]
1. Open [TOP]-[Maintenance]-[Maintenance].
2. Click the "Browse" button (may vary depending on the browser) of "Manually Update Firmware" to select the new
firmware file saved in the computer.
3. Click the "Update" button.
4. This product automatically restarts when firmware update is completed.
[Note]
Setting values are inherited in firmware upgrade.

Setting values are initialized in firmware downgrade.

■When Web setting is used (Online upgrade)
[Setup]
1. Open the [Maintenance] screen from [TOP]-[Maintenance].
2. Select "Online Upgrade" of "Manually Update Firmware".
3. Click the "Update" button.
4. Wait for a while until "Firmware Version Information" is displayed.
5. Click the "Update Firmware" when current firmware version is different from the new firmware version.
Stop when the "Current Firmware Version" and "New Firmware Version" are the same.
6. Click the "OK" button in the popup message window.
7. After a while, "The firmware is updated. Access it again." is displayed on the screen.
8. This product automatically restarts when firmware update is completed.
|Setting/Setting Confirmation 167