NEC ZA-SA3500G Function Manual page 132

6. STEP2: Administrator password is set.
One-byte characters 0-9, a-z, and A-Z, - (hyphen) and _ (underscore) can be used for the password.
Password can have 1-64 characters.
*The administrator password is the login password at the Web setting of this product.
*The set password is saved in memory by clicking the "Apply" button in STEP4.
7. STEP3: Set the uplink interface network
Be sure to set it according to your environment.
Option
IPoE（DHCP）
IPoE（Manual）
PPPoE
In order to use the security/scan function of this product, an IPv4 address is required for management
15
132 Setting/Setting
Description
Select when the WAN interface IP address
Select this when manually setting the IP address of the WAN interface of this product.
When this item is selected, set the following items.
IPv4 address/netmask (bit specification)

Gateway address

IPv4 primary DNS

IPv4 secondary DNS (optional)

Select this when acquiring the IP address of the WAN interface of this product with
PPP.
When this item is selected, set the following items.
Authentication ID

Authentication password

* Alphanumeric characters and symbols (ASCII: 0x20-0x7e) can be used for the
authentication ID and password. Password can have up to 128 characters.
Confirmation|
15
of this product is acquired through DHCP.