Table of Contents
Advertisement
■Device map display setting (MAC mode)
1. Click [Setting] tab in [TOP]-[Network Topology]-[Device Map].
2. Select the update interval from the pull-down menu.
3. Enter comments for each interface. Maximum of 32 characters.
4. Click the [Apply] button.
5. Click the [Save] button to save the setting.
Setting Item
Update Interval
Interface Comment
LAN1
LAN2
LAN3
LAN4
WLAN(Primary)
Description
Set the update time in the background of the device information to
display in the pull-down.
Select from 1 hour, 4 hours, 8 hours, 12 hours, 24 hours, no update.
Comments on each physical interface can be placed.
Enter a name to identify LAN port 1. It can be set within 0 to 32
characters.
Enter a name to identify LAN port 2. It can be set within 0 to 32
characters.
Enter a name to identify LAN port 3. It can be set within 0 to 32
characters.
Enter a name to identify LAN port 4. It can be set within 0 to 32
characters.
Enter a name to identify the primary SSID. It can be set within 0 to 32
characters.
|Setting/Setting Confirmation
Initial
Value
1 hour
Not Set
Not Set
Not Set
Not Set
Not Set
287
Advertisement
Table of Contents
