Restart; Maintenance Function; Switching To Bridge Mode - NEC ZA-SA3500G Function Manual

5.7.26. Restart

Same setting with maintenance (bridge mode). Refer to Section 5.6.15.

5.7.27. Maintenance Function

Same setup with maintenance (bridge mode). Refer to Section 5.6.16.

5.7.28. Switching to Bridge Mode

This product restarts when it is switched to the bridge mode.
And also, all settings are initialized.
1. Open the [Connection Setup] screen from [TOP]-[Maintenance]-[Basic Setup].
2. Select "Bridge" for mode setup.
3. Click the "Apply" button.
4. Click the "OK" button on the restart message window.
5. After restarting, execute STEP2 (Administrator Password) of the wizard. Set it according to Section 5.2.1.
|Setting/Setting Confirmation 243