Table of Contents
Advertisement
Setting Item
MAC Address
Filtering
Select Interface
Type
MAC Address
Filtering Setting
*The comment set for the LAN terminal on the device management screen is displayed in the comment field. A
comment is displayed when the device management method is set in MAC mode. The comment is deleted when it is
changed to IP mode. For the setting of the comment field, refer to Section 5.9.3.
■Wireless LAN MAC address filtering screen
1. Open [TOP]-[Maintenance]-[Filter Setup]-[MAC Address Filtering] screen.
2. Select the target type and select "Wireless LAN".
Value
• Wired LAN: Select this to set MAC
address filtering for the wired LAN
interface.
• Wireless LAN: Select this to set MAC
address filtering to the wireless LAN
interface.
Check to enable the MAC address
filtering function.
Remarks
It cannot be checked if there is no
entry.
|Setting/Setting Confirmation
Initial
Value
Wired
LAN
Disabled
153
Advertisement
Table of Contents
