Table of Contents
Advertisement
1. Open the [SNMP] screen from [TOP]-[Maintenance]-[Management].
2. Set the various items related to SNMP.
3. Click the "Apply" button.
4. Click the "Save" button.
Setting Item
SNMP Agent Settings
SNMP Agent
Function
Physical Location
(sysLocation)
Contact Information
(sysContact)
Access Restriction
SNMP Manager 1~3
SNMP Community
Settings
Community 1~3
SNMP Trap Settings
SNMP Trap
Value
• Checked: if SNMP function is used.
• Unchecked: if SNMP function is not
used.
Installation location (sysLocation) of
the device can be noted.
Available character string:
Alphanumeric characters
Maximum number of characters: 64
Contact information (sysContact) can
be noted.
Available character string:
Alphanumeric characters
Maximum number of characters: 64
Set whether to allow only a specific
SNMP manager or any SNMP manager
access of this product.
• Checked: if only a specific SNMP
manager is allowed access.
• Unchecked: if access from any
SNMP manager is allowed.
Set the SNMP manager's IP address
when "Access Restriction" is used.
Set the SNMP community name.
Available character string: Single-byte
symbols
Maximum number of characters: 32
• Checked: when the trap
transmission function is used.
• Unchecked: when the trap
transmission function is used.
Remarks
Community name must be set if
SNMP function will be used.
0x21~0x7e can be used.
Unavailable characters are:
" $ ' ` # \ (backslash) and
<space>
0x21~0x7e can be used.
Unavailable characters are:
" $ ' ` # \ (backslash) and
<space>
Set one or more SNMP managers
when this function is to be used.
0x21~0x7e can be used.
Unavailable characters are:
" $ ' ` # \ (backslash) and
<space>
|Setting/Setting Confirmation
Initial Value
Disabled
Not set
Not set
Disabled
Not set
Not set
Disabled
239
Advertisement
Table of Contents
