Table of Contents
Advertisement
10. After completing the above procedure, user will be redirected to TOP screen.
If this is displayed in the screen, the following can be considered.
・Activation is incomplete (first time only)
・License check is incomplete after device startup.
11. Set the network of this product. (Refer to Section 5.7）
12. Set the security/scan function. (Refer to Section 5.8）
13. Set configuration management. (Refer to Section 5.9)
14. Save the settings. (Refer to Section 5.5）
15. Activation the product. (Refer to Section 5.2.3）
Activation is executed only at the initial startup.
16. Confirm availability of new firmware with the online upgrade
function. If there is new firmware, update the firmware.
(Refer to Section 5.6.14)
17. Restore the IP address of the computer.
*Set it to its original settings
Activation
|Setting/Setting Confirmation
135
Advertisement
Table of Contents
