Table of Contents
Advertisement
１）Network configuration that can be installed without changing the network in bridge mode
From the viewpoint of each node, the exit is one network
Since all packets between the node (PC etc.) and the internet pass through the SA3500G, this product can be installed
without changing the network.
2) Depending on the network that requires confirmation of the network configuration upon installation, changing the
setting of other network equipment may be needed.
A network where there are multiple packet routes to each node
This is an example of a network configuration where it is assumed that all packets going back and forth between nodes
(including internet access from the node) will not pass through this product.
In that case, the network must be designed so that all packets pass through this product.
|Troubleshooting
341
Advertisement
Table of Contents
