NEC ZA-SA3500G Function Manual page 180

Setting Item Value
Connection Set ID/password used for PPP
Destination Settings authentication
Username Set the user name to be used
for PPP authentication
Password Set the password to be used
for PPP authentication
PPP Keepalive PPP Keepalive function setting
PPP Keepalive • Checked: when PPP
Function
• Unchecked: when PPP
LCP ECHO Set the transmission interval of
Transmission the PPP Keepalive packet at
Interval (in 1~255 seconds.
seconds)
LCP ECHO Retry Set the retransmission interval
Transmission from 1~255 seconds when the
Interval (in PPP Keepalive response packet
seconds) is not received.
LCP ECHO Retry When the response is not
Count received from the BAS (server)
(frequency) even after sending the set
number of PPP Keepalive
packets, the PPP session is
disconnected. Set between
1~255.
180 Setting/Setting
Keepalive function is used.
Keepalive function is not
used.
Confirmation|
Remarks
PPP authentication protocol supports PAP and
CHAP. Authentication protocol is selected
automatically according to the instructions of
the BAS (server).
Allowed characters are alphanumeric
characters and symbols (ASCII: 0x20~0x7e);
up to 128 characters.
Allowed characters are alphanumeric
characters and symbols (ASCII: 0x20~0x7e);
up to 128 characters.
Session disconnection with the BAS (server)
can be detected using the PPP Keepalive
function. On the other hand, the function
may not operate properly when the load of
this product is high, and it may lead to the
disconnection of the PPP session.
When the transmission interval is shortened,
the timing of the abnormality detection
becomes faster.
When the transmission interval is shortened,
the timing of the abnormality detection
becomes faster.
When the transmission interval is shortened,
the timing of the abnormality detection
becomes faster.
Initial
Value
Not set
Not set
Disabled
Not set
Not set
Not set