NEC ZA-SA3500G Function Manual page 224

IKE quick
Phase2 mode
(=Ph2)
*The IPsec device that acts as the initiator is not specified, but one IPsec tunnel can be established.
■Local ID and remote ID of IKEv2 are treated as follows.
Phase
IKE AUTH
exchange
224 Setting/Setting
initiator 1 Send
Receive
from peer
responder 1 Send
Receive
from peer
Mode Behavior Peer
- initiator 1
responder 1
Confirmation|
IKEv2
Direction local-id
Send Send with IKE
AUTH exchange
request
Receive Compare with
from peer remote-id of
local station
Send Send with IKE
AUTH exchange
response
Receive Compare with
from peer remote-id of
local station
Send in Send in
sequence 1 sequence
1
Unused Unused
Send in Send in
sequence 2 sequence
2
Compare Compare
with with local-
remote-id id of local
of local station.
station.
remote-id
Send with IKE
AUTH exchange
request
Compare with
local-id of local
station
Send with IKE
AUTH exchange
response
Compare with
local-id of local
station