Table of Contents
Advertisement
■Permit tab
*This screen is a sample display where "xxxxx.com/" is registered. The list is not initially set.
1. Enter the specific URL and click the "Add" button.
2. Click the "Delete" button to remove the URL from the list.
[Note]
The hostname is exactly matched, and pathnames are determined by prefix matching.
For HTTPS, it is only determined by the hostname.
Setting Item
Permit List
URL
Description
Displays the URL that excluded from detection by the Web Guard (WG).
Set it from the security log screen or from this page.
When individual permission is done, applicable communication will be
permitted even if it is dangerous.
Displays the URL excluded as detection target that was set by the
customer.
Enter the hostname and pathname of the URL. Pathname is optional. Do
not include "http://" or "https://" in the URL.
The hostname is exactly matched and pathnames are determined by
prefix matching. For HTTPS, it is only determined by the hostname.
Possible characters: ASCII (0x21~0x7e)
Multibyte characters (" ' ` $ \ <> are excluded.)
Maximum size of URL: 255 characters (255 bytes)
[Breakdown]
127 characters (127 bytes) for the host name
127 characters (127 bytes) for the path name
1 character (1 byte) (/) between host name and
path name
|Setting/Setting Confirmation
Initial
Value
Not set
257
Advertisement
Table of Contents
