NEC ZA-SA3500G Function Manual page 189

Setting Item Value
Select Wireless LAN • Primary SSID
profile • Secondary SSID
Wireless LAN Access point setting
Access Point Setting
(parent device)
Wireless • Checked: when wireless LAN
Function
• Unchecked: when wireless LAN
Network Name Set SSID.
(SSID)
Dual Channel • Enable
Function • Disable
Used Channel • Auto: An empty channel between
• 1~13: When a fixed channel is
Network • Check when this function is to be
Isolation
Function • Unchecked when this function is
* Not available in
bridge mode
Encryption
Encryption mode Choose the encryption mode to be
used.
• No Encryption
• WPA-PSK(TKIP)
• WPA-PSK(AES)
• WPA2-PSK(TKIP)
• WPA2-PSK(AES)
• WPA/WPA2-PSK(TKIP)
function is used.
function is not used.
1~11 is chosen automatically
set.
used.
not to be used.
Remarks
Character string may contain
alphanumeric characters,
_(underscore), and -
(hyphen). Up to 32
characters can be used.
This is a function where twice
the transmission rate
(specification 300Mbps or
less) is achieved by extending
the width of the
communication channel used
by the wireless LAN
communication from 20MHz
to 40MHz.
Refer to Section 3.7.1 for the
network isolation.
When the encryption mode is
set to TKIP or EAP, the WPS
function is disabled.
|Setting/Setting Confirmation
Initial Value
Both primary and
secondary are
disabled
Primary: sa3500-
XXXXXX-g
Secondary: sa3500-
XXXXXX-gw XXXXXX
Enter a different
value for each device
Enabled
(It can only be set on
the primary)
Auto
(It can only be set on
the primary)
Both primary and
secondary are
disabled
Both primary and
secondary are
WPA/WPA2-PSK(AES)
189