Table of Contents
Advertisement
SNMP Trap Type
SNMP cold-start
Trap Delay Time
(sec)
Table
No. 1~3
240
Setting/Setting
Specification of trap to be sent.
• ALL: all types of trap are sent.
• Trap Specification: when some
traps are sent (when this item is
selected, check the checkbox of the
trap to be sent.).
cold-start: sent when power supply
is turned OFF then ON.
link-down: sent when interface is
down
link-up: sent when interface starts
auth-failure: sent when
authentication failed due to
community name mismatch.
Set the cold-start trap delay time.
Range is 0~3,600 seconds
• Destination: Destination IP
address of trap
• Community: Select the community
name when trap is sent from
"Community 1", "Community 2",
and "Community 3".
• Version: Select SNMP version is
from "v2c" and "v1".
Confirmation|
v2c: SNMPv2c
v1: SNMPv1
ALL
5
Not set
Community
1
v2c
Advertisement
Table of Contents
