Table of Contents
Advertisement
Notify on Detecting
IPS Block
Notify on Detecting
Update Firmware
Notify on Detecting
Near Expiration
License
Notify on Detecting
Expiration License
Notify on Monthly
Report
Monthly Report
Notice Timing
Setting Item
Test Mail
Send Test Mail
Result
274
Setting/Setting
Check this item to send email when communication is guarded by the
Intrusion Prevention System function.
Check this item to send email if a firmware update is detected.
Check this item to be notified by e-mail when the license expiration date
is nearing (60 days in advance).
Check this item to be notified by e-mail when the license expiration date
has expired.
Check this item to send monthly reports every first day of the month.
Specify the schedule of monthly reports sending.
In order to send notification, this product must be ON every first day of
the month.
Description
Email is sent to the administrator's email address.
To execute the test mail, an account and email address (administrator)
must be setup beforehand.
An email is sent to the administrator's email address when the "Send"
button is clicked.
After executing the test mail, the result is displayed when the "Result"
button is clicked.
Sending: Email is being sent. After a while, click the "Result" button
again.
Transmission complete: Email was normally transmitted. Confirm
whether an email arrived to the administrator's address.
Transmission failed: Email was not normally transmitted. Check the
contents of the mail address (administrator) and account setting.
Confirmation|
Disabled
Enabled
Enabled
Enabled
Disabled
10:00
Initial Value
－
－
Advertisement
Table of Contents
