Security Log - NEC ZA-SA3500G Function Manual

3.3.13. Security Log

The detection status of this product's security/scan function can be confirmed in the log messages.
These log messages can be saved in computers.
[Content of log message]
Detection date

Name of function (FW, AV, IPS, WG, UF, KF, APG)

Detection contents

IP address of detected terminal

[Saving logs]
Saving the log messages

- The log file is regularly saved in memory.
- Maximum size of the log file storage area is 500 MB.
Log files are generated and saved every 1 MB.
Log messages can be up to 1,000 bytes each.
When the log storage is exceeded, the oldest log is deleted and a new log is saved.
- The POWER lamp blinks orange while saving log files, so do not turn off the power supply.
Other than the abovementioned, a log file is saved depending on the timing of device restart by Web setting

operation.
*In case of a power outage and power cutoff, the log message that was not saved in memory is lost.
[Web setting operation]
1,000 worth of log messages from the most recent can be confirmed at Web setting.

Security logs are deleted by pressing the "Clear" button. Log files saved in memory are deleted.

Communication to be blocked (individual permission) that is not included in the threat detection can be set.

Security Function
Antivirus (AV)
Intrusion Prevention System (IPS)
Web Guard (WG)
URL Filter (UF)
[Note]
During initialization, log files saved in Flash ROM are deleted.

Number of Configurable Individual Permissions
10
100
10
100
|Function Specification 65