Table of Contents
Advertisement
■ For IEEE802.11g
1ch (2.412GHz)
↓
20MHz
There are two ways to specify the channel be used by this product.
No.
Method
1
At the start of the operation of this product's wireless LAN
function, the surrounding access point is detected, and the
channel with good incoming signal strength is selected
automatically.
2
Channel used by customer is selected.
This product has a dual channel function that achieves about twice the transmission rate by increasing the
communication channel width being used from 20MHz to 40MHz for wireless LAN communication.
When the dual channel function is enabled, select the following channels.
Control Channel
1
2
3
4
5
6
7
8
9
10
11
12
13
[Encryption method]
The encryption methods supported by this product are as follows:
WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), WPA2-PSK (AES), WPA/WPA2-PSK (TKIP), WPA/WPA2-PSK
(AES), 802.1x（EAP）
In addition, "No Encryption" can be selected.
112
Function
Specification|
5ch (2.432GHz)
↓
Extension Channel
5
6
7
8
1
2
3
4
5
6
7
8
9
9ch (2.452GHz)
13ch (2.472GHz)
↓
Range of CH Selection
The channel between 1ch~11ch with good
signal condition is automatically selected.
Any channel between 1CH~13Ch can be
selected.
↓
Frequency
Advertisement
Table of Contents
