Table of Contents
Advertisement
6. STEP2: Set the administrator password
One-byte characters 0-9, a-z, and A-Z, - (hyphen) and _ (underscore) can be used for the password.
Password can have 1-64 characters.
*The administrator password is the login password at the Web setting of this product.
*The set password is saved in memory by clicking the "Apply" button in STEP4.
*If the device management mode is changed to IP mode and then restart, the Back button will not be displayed.
7. STEP3：Set the IP address of the device
Be sure to set it according to your environment.
Option
IPoE (DHCP)
IPoE (Manual)
14
This product requires an administrative IPv4 address to use the security/scan function of this product.
126
Setting/Setting
Description
Selected when the IP address
Select this when the IP address of this product is set manually.
Set the following when this item is selected.
IPv4 address/netmask (bit specification)
Gateway address
IPv4 Primary DNS
IPv4 Secondary DNS (optional)
Confirmation|
14
of this product is acquired through DHCP.
Advertisement
Table of Contents
