[Note]
Click "Event Log Setup" to open the "Event Log Setup" screen and change the level to save the event log.
1. Open the [Event Log Setup] screen from [TOP]-[Maintenance]-[Information]-[Event Log].
2. Select the level to save the event log from "Log Level".
3. Click the "Apply" button.
4. Click the "Save" button to save the setting.
Setting
Value
Item
Event Log
•
Checked: If the event log function is used
Function
Unchecked: If the event log function is
•
not used
Log Level
Emergency
Alert
Critical
Error
Warning
Notice
Informational
Debug
E
vent volume: small
Event volume: big
Remarks
Set the level to save the event log.
|Device Information Confirmation
Initial Value
Enabled
Informational
321