NEC ZA-SA3500G Function Manual page 44

[Operation at normal startup]
When this product starts, the license is confirmed. When the response of the completion confirmation is received from
the server, the security/scan function of this product is enabled. The bridging/routing function of this product does not
operate until the security/scan function is enabled.
POWER lamp is green
ALERT2 lamp is green
ALERT2 Lamp is off
1. When this product starts, the ALERT2 lamp lights green.
2. The NETWORK lamp lights orange or green when this product goes to a state where it can communicate over the
Internet. In this timing, the security/scan function is started. The confirmation processing of the license is executed
at the same time.
3. The ALERT2 lamp is turned off when the startup of the security/scan function is completed, and this product
enables the bridging/routing operation.
4. The updated signature information is regularly confirmed after this.
6 Green ALERT2 lamp indicates that the security/scan function is disabled.
44 Function Specification|
☞
☞
☞
NETWORK lamp is
orange or green
☞
Regular checking
Product
Power supply ON
IP setup
License
confirmation complete
Security/scan function is enabled
Bridging/routing is enabled
Signature confirmation
Signature information
Signature update
☞
Signature confirmation
Signature information
Signature update
6
Server
License
confirmation
License management