NEC ZA-SA3500G Function Manual page 200

Setting Item
Cloud Service Settings
Cloud Service Function
Service Type
AWS (Amazon Web Services)
Setting
BGP Peer WAN IP Address
(Cloud)
VPN Address
AS Number
Own VPN Address
Device
(SA3500G)
AS Number
Advertising Route
Encryption/Authentication Setting
IKE Pre-shared Key
By setting Amazon Web Services, the following fixed values can be set.
Although IPsec settings can be changed on the IPsec setting screen, it is recommended to use the settings as set on
the Cloud Service Setting screen. Note that if the settings on the IPsec setting screen are changed, cloud connection
may not be available. Also, if the content of the service on Amazon Web Services changes, it may not be able to
connect with the content set on the Cloud Service Setting screen.
Setting Items
BGP4
KeepAlive/Hold timer setting
200 Setting/Setting
Value
• Checked: When using Cloud
service function
• Unchecked: When not using Cloud
service function
• AWS (Amazon Web Services)
• Microsoft Azure (Route Based)
• Microsoft Azure (Policy Based)
Outside IP Addresses: Set the
address of Virtual Private Gateway.
Inside IP Addresses: Set the Virtual
Private Gateway.
BGP Configuration Options: Set the
Virtual Private Gateway ASN (1 to
65535)
Inside IP Addresses: Set the
Customer Gateway.
BGP Configuration Options: Set the
customer gateway ASN (1 - 65535).
Set the route-advertised network
address and netmask. Up to 5 can be
set.
1 to 64 single-byte characters
ASCII symbols 0x21 to 0x7e
(Excluding ", ', `, #, \, $, space, ?)
Value
Hold timer 30 seconds, Keep Alive timer 10
seconds
Confirmation|
Remarks
Remarks
Initial Value
Disabled
Not Set
Not Set
Not Set
Not Set
Not Set
Not Set
Not Set
Not Set