Table of Contents
Advertisement
Setting Item
Connection
Destination
Selection
IPv4
■Procedure 2. Various WAN interface settings
The setting contents will change depending on the contents selected in procedure 1.
IPv4 WAN Interface Setting Method
(a)
Fixed setting
(b)
Set using the DHCP client function
(c)
Set using the PPP function
If the WAN interface of the product is set with a fixed IP address, the default gateway and DNS server addresses must
be set. (Refer to Section 5.7.11)
Setting Contents
WAN interface IP address of this product
Default gateway address
DNS server address
176
Setting/Setting
Value
Select the protocol to operate on
the WAN interface of this
product.
• Select IPoE if the IP address of
the WAN interface is set to
"Fixed" or "DHCP client
function".
• Select PPPoE if the IP address
of the WAN interface is set to
"PPP".
Confirmation|
Remarks
The DHCP client and PPP functions are
set on different setting screens.
Setting Contents
Refer to the following content.
Refer to Section 5.7.5.
Refer to Section 5.7.4.
Setting Screen
IPv4 WAN (IPoE) setting
IPv4 WAN (IPoE) setting
DNS setting
Initial Value
IPoE
Advertisement
Table of Contents
