NEC ZA-SA3500G Function Manual page 187

5.7.8.2. When authenticating with the internal RADIUS server
When using the RADIUS server in this product, set the RADIUS server on the [Simple RADIUS function] screen. For
the details, refer to Section 5.8.12.
1. Open the [Wireless Setup] screen from [TOP]-[Maintenance]-[Wireless Setup].
2. Check "Enable" under the "Wireless Function".
3. Change the encryption mode to "802.1x (EAP)".
4. Confirm that "Internal" is selected for "Authentication Server Type".
5. Click the "Apply" button.
6. Click the "Save" button
7. Configure RADIUS server on [TOP]-[Security]-[Simple RADIUS function] screen.
For the details, refer to Section 5.8.12.
|Setting/Setting Confirmation 187