Table of Contents
Advertisement
3. Click "Edit" to enter the edit screen and add the wireless MAC address to be connected.
4. Check the SSID that enables MAC address filtering function.
5. Click the "Apply" button.
6. Click the "Save"
button.
Setting Item
MAC Address
Filtering
Select Interface
Type
Enable MAC
Address Filtering
*The comment set for the LAN terminal on the device management screen is displayed in the comment field. For the
setting of the comment field, refer to Section 5.9.3.
154
Setting/Setting
Value
• Wired LAN: Select this to set MAC
address filtering for the wired LAN
interface.
• Wireless LAN: Select this to set the
MAC address filtering of the wireless
LAN interface.
• Primary SSID: Select this to
configure the primary SSID.
• Secondary SSID: Select this to
configure the secondary SSID.
Confirmation|
Remarks
Initial Value
Wired LAN
Disabled
Advertisement
Table of Contents
